OKX app

List of the contents of this article:

• 1, How to install the system of Acer w510
• 2. How to reinstall the system of Acer notebook by yourself?
• 3、Acer notebook reinstall system steps

How to install the Acer w510 system

1. Step 1: Prepare a USB flash drive First,OKX app you need to prepare a USB disk with a capacity of more than 4GB, and will Keep the USB flash drive in a dry place to ensure that it will not be contaminated. Then plug it into the USB port of the computer and wait for the system to automatically recognize and assign the disk character.

2. Double-click to open the Xiaobai one-click reinstall system tool and wait for the local environment detection. When the system selection interface appears, it is generally recommended to install the recommended system, click Expand, and then click Install This System.

3. Operation steps: First of all, we prepare a USB flash drive. What we want to say here is that we must separate the hard disk when we use the USB flash drive to install the system. If your computer doesn't have a hard disk partition, you can put it somewhere else.

4. Select the boot disk path of the usb disk (mine is F12), click Enter to confirm, and enter the installer. Open the USB disk installation tool and copy the system to the USB disk, and press the Enter key to start reinstalling the system (in this step, you must press the F10 or F11 key to select the version of the system you want).

5. How to reinstall the system of Acer laptop: Step 1: Turn on the Acer laptop. When turning on the Acer laptop, we can install the battery of the laptop and then turn it on, or we can not install the laptop. The battery is turned on directly.

6. After making the USB boot disk, copy the downloaded notebook system iso file directly to the directory of the USB disk. Insert the USB flash drive into the USB interface of the notebook that needs to reinstall the system to start. Start from the USB flash drive to start the pe system. Re-partition after entering the pe system.

How to reinstall the system on the Acer notebook by itself?

Open the USB disk installation tool and copy the system to the USB disk, and press the Enter key to start reinstalling the system (you must press the F10 or F11 key at this step to select the version of the system you want).

Acer notebook enters bios and reinstalls the system step: 1. Press F2 to enter the mian project of BIOS and select F12 Boot menu as Enable., press the return button to confirm the boot order. When the system starts up, it will load the boot program in the CD. Press F10 to save the settings and click Exit to restart.

Next, let's learn the Acer netbook reinstall system tutorial with the editor.

The system needs to be reinstalled. There are many ways to install the system on the computer, and you can choose one of the operations listed below. Hard disk installation: Press the F11 key or F8 key after power-on or restarting to see if one-click GHOST or similar software is installed. If there is, select one-click restore and press Enter to confirm. After entering the one-click restore operation interface, select "Restore" to confirm.

Finally, press the F10 key to save the settings to exit, and restart the computer to complete the installation process. It should be noted that the above steps need to be reinstalled if the USB flash drive is not formatted after the installation is completed.Before entering the BIOS to modify the boot order of the hard disk, please insert the USB flash drive into the USB interface of the computer and turn on the USB flash drive.

Acer notebook reinstall system steps

Start the computer and hold down the DEL key until the BIOS setting window appears (usually blue background, yellow English characters. This article will introduce in detail the steps of reinstalling the Acer notebook system. SELECT BIOS SETTINGS AND ENTER THE SECOND ITEM, "BIOS SETUP".

After making the USB disk boot disk, copy the downloaded notebook system ISO file directly to the USB disk directory; insert the USB disk into the USB interface of the laptop that needs to be reinstalled to start; start the PE system from the USB disk;Re-partition after entering the PE system.

The first step is to download Onekey ghost and Win7 system images. Note: Do not save it in the C disk after downloading (the desktop is also a folder in the C disk, so it cannot be saved on the desktop).