CD-ROM installation system steps to enter BIOS settings to start up - insert CD-ROM - press DEL (desktop) or F2 key (most notebooks) or its It keys to enter the BIOS-set the computer to start from the CD-ROM-F10-Y-Enter, and the computer will automatically restart to enter the system installation. After updating the driver and installing the system, just update the driver with the driver sprite.
Insert the system CD into the computer's optical drive, then press the computer's power button and click the F12 key continuously. Some laptop models are F12 + FN keys.
Under normal power-on, put the CD into the optical drive and restart the computer (if it is abnormal, you can put it in after the power is turned on). Press DEL or other keys to enter the BIOS, and set the settings to start from DVD-F10-Y-Enter. After entering the PE interface, select "Install System" after entering the PE interface.
You can follow the steps below to install the system disk system, buy a win7 CD, buy a win7 CD, and put the system CD into the optical drive. Set the startup mode to turn on the power, and then observe the prompts on the screen. Before starting the system, press "F2" to set the BIOS.
Power-Insert CD-ROM-Press DEL (desktop) or F2 key (most notebooks) or other keys to enter BIOS-Set the computer to start from CD-F10-Y-Enter, the computer automatically Enter the system installation. After updating the driver and installing the system, just update the driver with the driver sprite. After the boot installation is completed from the hard disk, restart.
First of all, after downloading the software, open it normally ("one-click reinstall system"). The program will detect the current system environment by default. After the detection is completed, click "Next".
Under normal power-on, put the CD into the optical drive and restart the computer (if it is abnormal, you can put it in after the power is turned on). Press DEL or other keys to enter the BIOS, and set the settings to start from DVD-F10-Y-Enter.After entering the PE interface, select "Install System" after entering the PE interface.
1. Put the CD-ROM, buy a win7 CD-ROM, and put the system CD-ROM into the optical drive. Turn on the power in the BIOS settings, and then observe the prompts on the screen. Press "F2" to set the BIOS before starting the system.
2. Turn on the computer and press the Delete key when the computer self-checks, (Note: Some computers are Enter and F1 keys). After entering the CMOS interface, select the Startup option with the left and right keys on the keyboard. Select the first PrimaryBootSequence option and press the Enter key on the keyboard.
3. The first step, setOptical opening: The so-called optical opening means that the computer first reads the optical drive when starting up. In this way, if there is a CD with optical opening function in the optical drive, it can be read out before the hard disk starts (for example, when installing the system from the CD).
4. Pop up a dialog box to perform the decompression process of the CD image file, which needs to wait a few minutes. After decompression, we open the installation directory and find the [install system.exe] program.
5. To install from the disc, the BIOS should be set so that the system can start from the disc. The method is as follows: BIOS settings start the computer. When the Press Del to Enter BIOS Setup prompt message is displayed on the screen, press the Del key on the keyboard to enter the motherboard BIOS setting interface.
OKX Wallet APK-APP, download it now, new users will receive a novice gift pack.
CD-ROM installation system steps to enter BIOS settings to start up - insert CD-ROM - press DEL (desktop) or F2 key (most notebooks) or its It keys to enter the BIOS-set the computer to start from the CD-ROM-F10-Y-Enter, and the computer will automatically restart to enter the system installation. After updating the driver and installing the system, just update the driver with the driver sprite.
Insert the system CD into the computer's optical drive, then press the computer's power button and click the F12 key continuously. Some laptop models are F12 + FN keys.
Under normal power-on, put the CD into the optical drive and restart the computer (if it is abnormal, you can put it in after the power is turned on). Press DEL or other keys to enter the BIOS, and set the settings to start from DVD-F10-Y-Enter. After entering the PE interface, select "Install System" after entering the PE interface.
You can follow the steps below to install the system disk system, buy a win7 CD, buy a win7 CD, and put the system CD into the optical drive. Set the startup mode to turn on the power, and then observe the prompts on the screen. Before starting the system, press "F2" to set the BIOS.
Power-Insert CD-ROM-Press DEL (desktop) or F2 key (most notebooks) or other keys to enter BIOS-Set the computer to start from CD-F10-Y-Enter, the computer automatically Enter the system installation. After updating the driver and installing the system, just update the driver with the driver sprite. After the boot installation is completed from the hard disk, restart.
First of all, after downloading the software, open it normally ("one-click reinstall system"). The program will detect the current system environment by default. After the detection is completed, click "Next".
Under normal power-on, put the CD into the optical drive and restart the computer (if it is abnormal, you can put it in after the power is turned on). Press DEL or other keys to enter the BIOS, and set the settings to start from DVD-F10-Y-Enter.After entering the PE interface, select "Install System" after entering the PE interface.
1. Put the CD-ROM, buy a win7 CD-ROM, and put the system CD-ROM into the optical drive. Turn on the power in the BIOS settings, and then observe the prompts on the screen. Press "F2" to set the BIOS before starting the system.
2. Turn on the computer and press the Delete key when the computer self-checks, (Note: Some computers are Enter and F1 keys). After entering the CMOS interface, select the Startup option with the left and right keys on the keyboard. Select the first PrimaryBootSequence option and press the Enter key on the keyboard.
3. The first step, setOptical opening: The so-called optical opening means that the computer first reads the optical drive when starting up. In this way, if there is a CD with optical opening function in the optical drive, it can be read out before the hard disk starts (for example, when installing the system from the CD).
4. Pop up a dialog box to perform the decompression process of the CD image file, which needs to wait a few minutes. After decompression, we open the installation directory and find the [install system.exe] program.
5. To install from the disc, the BIOS should be set so that the system can start from the disc. The method is as follows: BIOS settings start the computer. When the Press Del to Enter BIOS Setup prompt message is displayed on the screen, press the Del key on the keyboard to enter the motherboard BIOS setting interface.
354.39MB
Check188.11MB
Check658.86MB
Check213.77MB
Check211.61MB
Check497.82MB
Check797.42MB
Check338.29MB
Check467.12MB
Check877.16MB
Check422.16MB
Check748.29MB
Check266.17MB
Check443.81MB
Check996.35MB
Check516.51MB
Check813.62MB
Check825.54MB
Check844.18MB
Check727.41MB
Check375.87MB
Check627.48MB
Check693.73MB
Check218.55MB
Check724.68MB
Check555.37MB
Check846.78MB
Check955.32MB
Check355.92MB
Check966.71MB
Check493.45MB
Check949.81MB
Check563.68MB
Check539.11MB
Check551.99MB
Check727.29MB
CheckScan to install
OKX Wallet APK to discover more
Netizen comments More
662 案无留牍网
2025-02-28 09:35 recommend
2622 耻居人下网
2025-02-28 08:45 recommend
2337 娱心悦目网
2025-02-28 08:44 recommend
2462 变危为安网
2025-02-28 08:15 recommend
2437 出何典记网
2025-02-28 07:58 recommend