OKX Wallet extension

List of the table of contents of this article:

• 1, How to use the mobile phone system?
• 2, How to brush the system on mobile phone
• 3, How to refresh the system of the mobile phone?
• 4、OKX Wallet extensionturned on' title='The mobile phone can't be turned onHow to flash Android'>How to flash Android if the mobile phone can't be turned on
• 5, How to browse the Android phone system by yourself?
• 6、How to brush the system on a mobile phone Unify

How to brush the mobile phone system?

Soft brush soft brush: It is to use one-click flash software for fool-like brushing. Card swipe: that is, put the flash bag directly on the SD card, and then swipe directly on the mobile phone.

First of all, find the corresponding mobile phone system. Download it to the mobile phone memory or sd card. Press and hold the power key + volume up key to enter the recovery mode. Then put the mobile phone into recovery mode. In this mode, through the flash package we downloaded. Come to swipe the card.

If you choose to flash directly on your mobile phone, you can choose Recovery mode flashing. The specific steps are as follows: First of all, make sure whether your mobile phone has been flashed into Recovery. If not, you need to flash Recovery to enter Recovery. Brush the machine.Turn off the USB debugging when entering the settings and copy the flash package to the SD card.

Method 1: If the mobile phone is turned on, please turn it off first, cut off the battery and install it. In the case of turning off, press and hold the power key + Home button at the same time until the Recovery interface appears.

How to flash the system of the mobile phone

If you use a vivo mobile phone, you can refer to the following Chinese firmware tutorial: firmware upgrade: First, enter the vivo official website to download the firmware package: web link, select the corresponding model, and then click download Firmware: After the download is completed, put the upgrade package in the root directory of the storage or SD card (meaning not to put it in any folder).

After clearing, you can select the previously copied ROM package from the SD card of the mobile phone.The general form of flashing in the SD card is in the form of ZIP. Click the ZIP file on the SD card, and finally click OK to start flashing.

Then you can download the version you want to flash in the firmware resources. After connecting the mobile phone and downloading, click to enter the one-click flash. First of all, we connect the mobile phone according to the prompts. After querying SHSH, let's do it step by step.

Refresh the mobile phone manually. You can enter the official website of the mobile phone manufacturer, find and select the system upgrade module in the service function options, select the appropriate model and download the firmware to the computer, and then transfer it to the mobile phone to complete the installation and refresh of the system. Upgrade through third-party software.

Android system: Press and hold the power button and the volume up or down key at the same time, or press the three keys together, and hold them for 10 seconds to force the flash interface.Apple system: manually enter DFU mode: power-on state, connect to the computer with a data cable.

Install Windows 10 on your computer and set up to allow remote connection. Download and install remote desktop applications on your mobile phone, such as Microsoft's Remote Desktop application. Make sure that the mobile phone and the computer are on the same network, and then enter the IP address and login credentials of the computer in the mobile phone application.

How to refresh the system of the mobile phone?

1. If you choose to flash directly on your mobile phone, you can choose Recovery mode to flash. The specific steps are as follows: First of all, make sure whether your mobile phone has flashed into Recovery., if not, you need to brush into Recovery to enter Recovery for flashing. Turn off the USB debugging when entering the settings and copy the flash package to the SD card.

2. First of all, find the corresponding mobile phone system. Download it to the mobile phone memory or sd card. Press and hold the power key + volume up key to enter the recovery mode. Then put the mobile phone into recovery mode. In this mode, through the flash package we downloaded. Come to swipe the card.

3. Method 1: If the mobile phone is turned on, please turn it off first, cut off the battery and then install it. When the power is turned off, press and hold the power key + Home button at the same time until the Recovery interface appears.

How to flash the Android system if the mobile phone can't be turned on

1. Download a driver of that mobile phone, run it, then connect it to the computer, open the flash tool, and then enter recovery, press the volume key to select up and down. , pressing the power button is equivalent to the OK button. Then turn off the power first, press the volume up and do not release the power button until the recovery interface appears.

2. At this time, connect the mobile phone to the computer, and a storage disk will be recognized, and then go to the official website to download the latest firmware to upgrade. After the upgrade is completed, it can be turned on normally. You can also try this method if you can't enter the system normally due to the software.

3. If it can't be turned on, but you can enter recovery and enter the URL to operate http;Www: miui: com; a/101: html. If the above methods don't work, then it can be concluded that the motherboard of the mobile phone is burned out. Android mobile phone flashing methods can be roughly divided into four types: soft flash, card flash, line flash and factory flash.

4. There are two situations when the mobile phone system is broken. The first type can enter recovery, and the second type cannot enter recovery; Recovery is the backup function of Android mobile phones. In this mode, we can back up or upgrade the existing system, or To restore the factory settings here.

How to browse the Android phone system by yourself?

1. Soft brush soft brush: It is to use one-click flash software to flash for fools. Card swipe: that is, put the flash bag directly on the SD card, and then swipe directly on the mobile phone. Commonly used software for card flashing are: one-click ROOTVISIONary (get root), firmware management master (for flash recovery), etc. (or software with the same function).

2. First of all, you need to back up the data on your mobile phone before flashing.Because during the flashing process, all the data in the mobile phone memory will be emptied, including text messages, address books, photos, applications, etc. There are many ways to back up. Users can back up through the system's built-in tools or third-party software. After the backup is completed, you can start flashing.

3. This is an Android mobile phone. If you want to flash it, you can refer to the following steps. To download the computer butler, you can go to the official website of the computer butler to download a computer butler.

4. If the above methods don't work, it can be concluded that the motherboard of the mobile phone is burned out. Android mobile phone flashing methods can be roughly divided into four types: soft flash, card flash, line flash and factory flash. Soft brush soft brush: It is to use sweet pepper, elf, master and other one-click flash software for fool-proof brushing.

How to flash the system of the mobile phone

Mobile phone flashing refers to the installation of a new system, just like reinstalling the computer system, which can flash various systems suitable for mobile phones. Clean up the data in the mobile phone, such as APP, address book, text message, call records (just make a backup before flashing).

First of all, make sure whether your mobile phone has been flashed into Recovery. If not, you need to flash Recovery to enter Recovery for flashing. Turn off the USB debugging when entering the settings and copy the flash package to the SD card. Only when the USB debugging is turned off can the mobile phone memory be read.

Refresh the mobile phone manually. You can enter the official website of the mobile phone manufacturer, find and select the system upgrade in the service function options.Level module, select the appropriate model and download the firmware to the computer, and then transfer it to the mobile phone to complete the installation and refresh of the system. Upgrade through third-party software.

Flishing is to flash the firmware, which is equivalent to rewriting to the mobile phone system, which can solve the abnormal problem of the mobile phone system.

Backup data. Before flashing the system, be sure to back up all the data in the mobile phone. Because once you start flashing, all the data on the mobile phone will be emptied, including text messages, address books, photos, music, etc. Therefore, backing up data is a very important step.