1. The last way is to reinstall the system directly. When reinstalling, you should choose to format the system disk, or use other restore software such as ghost to restore the system directly.
2. Press the ESC key when the progress bar appears in the one-click restore wizard, and then enter the advanced settings in the menu bar, transfer to DOS, and manually GHOST to restore the WIN.GHO file in the IBM_SERVICE hidden partition.If there is still a problem, it may be that the hard disk has a bad channel. OR YOU CAN ALSO START THE COMPUTER WITH A BOOT DISK WITH GHOST TO RESTORE IT.
3. It depends on the situation. The cost of reinstalling may be huge. Maybe everything on the original hard disk will be finished. If you know DOS and check that the volume label of the C disk (using the dir command) is IBM_SERVICE, you can use IBM's one-click restore installer to repair it, just hold it once.
Driver sprite is very practical for users who do not have a drive disk at hand. Users can In order to extract and back up the drivers in the system through this software to achieve the effect of "cloning".
Let's take a look at the specific steps. Let's take a look at how the editor does it do~ What is the use of installing and downloading the driver sprite on the computer? Driver Genie is a free software for driver management, intelligent detection of hardware and automatic search for installation drivers. It will intelligently check from the Internet according to the system you are using and the hardware on your computer. Find the hardware driver you need.
, pointClick the "Treasure Chest" tab above to see all the functions of the driver elf, including system tools and system optimization, which is a very good practical toolbox.
1. First, try to download the new driver. Please refer to how to find the hardware driver for instructions on finding the driver. If the driver cannot be installed, please try to install it in compatibility mode: 1) If the driver has been installed, uninstall it.
2. It may be a sound card driver problem. Don't worry. Next, I will share with you the reason and solution for the no sound of the headphones inserted in front of the win8 computer chassis.
3. This is related to the driver. Please check whether the driver is not fully installed;If there is no problem with the driver, please check the settings of the Bluetooth device.
4. Driver problem: It may be that the driver of your USB audio device is not properly installed or updated, causing the system to be unable to recognize or use the device. You can try to uninstall and reinstall the driver of the device, or download the latest driver from the Windows update or the official website of the device to see if there is any improvement 123.
5. Next, the editor will introduce to you the solution to the problem that there is no sound when plugging in the headphones in the win1 system.
Windows10 system computer prompt: "Your computer has a problem and needs to be restarted. We only collect some error messages and need to be restarted" The specific situation and corresponding solutions are as follows: Situation 1: The system conflicts with third-party antivirus software.
Default mode 1: Open the main program, insert mobile devices such as USB flash drive/SD card, and the disk symbols, models, capacity and other information of all removable disks in the current computer will be automatically listed in the disk list.
There is a virus in the computer (open Tencent Computer Butler, one anti-virus, one scan and kill). If you kill a Trojan horse or virus, you should restart immediately. After restarting the computer, go to "Isolation | Recovery" and completely delete the Trojan horse and virus! 2.
Keep clicking F8 when bootingKey, enter the system operation menu, select "Last Correct Configuration", restart the computer, and see if it can be solved.
Use CD-ROM to reinstall the system. The operation steps are as follows: (1) Prepare the system CD-ROM: If not, you can go to the computer store to buy it, and buy the latest version of the CD-ROM of any system you need to install. If you have a burning optical drive, you can also download the ISO format system file on the Internet and burn it to the system CD.
Your situation may be that there are bad clusters, viruses, disk controller errors, and memory problems in the virtual memory page file. Check whether the hard disk and memory are damaged. If there is no problem with the hardware, you can try to reinstall the system on the USB flash drive.
OKX Wallet extension-APP, download it now, new users will receive a novice gift pack.
1. The last way is to reinstall the system directly. When reinstalling, you should choose to format the system disk, or use other restore software such as ghost to restore the system directly.
2. Press the ESC key when the progress bar appears in the one-click restore wizard, and then enter the advanced settings in the menu bar, transfer to DOS, and manually GHOST to restore the WIN.GHO file in the IBM_SERVICE hidden partition.If there is still a problem, it may be that the hard disk has a bad channel. OR YOU CAN ALSO START THE COMPUTER WITH A BOOT DISK WITH GHOST TO RESTORE IT.
3. It depends on the situation. The cost of reinstalling may be huge. Maybe everything on the original hard disk will be finished. If you know DOS and check that the volume label of the C disk (using the dir command) is IBM_SERVICE, you can use IBM's one-click restore installer to repair it, just hold it once.
Driver sprite is very practical for users who do not have a drive disk at hand. Users can In order to extract and back up the drivers in the system through this software to achieve the effect of "cloning".
Let's take a look at the specific steps. Let's take a look at how the editor does it do~ What is the use of installing and downloading the driver sprite on the computer? Driver Genie is a free software for driver management, intelligent detection of hardware and automatic search for installation drivers. It will intelligently check from the Internet according to the system you are using and the hardware on your computer. Find the hardware driver you need.
, pointClick the "Treasure Chest" tab above to see all the functions of the driver elf, including system tools and system optimization, which is a very good practical toolbox.
1. First, try to download the new driver. Please refer to how to find the hardware driver for instructions on finding the driver. If the driver cannot be installed, please try to install it in compatibility mode: 1) If the driver has been installed, uninstall it.
2. It may be a sound card driver problem. Don't worry. Next, I will share with you the reason and solution for the no sound of the headphones inserted in front of the win8 computer chassis.
3. This is related to the driver. Please check whether the driver is not fully installed;If there is no problem with the driver, please check the settings of the Bluetooth device.
4. Driver problem: It may be that the driver of your USB audio device is not properly installed or updated, causing the system to be unable to recognize or use the device. You can try to uninstall and reinstall the driver of the device, or download the latest driver from the Windows update or the official website of the device to see if there is any improvement 123.
5. Next, the editor will introduce to you the solution to the problem that there is no sound when plugging in the headphones in the win1 system.
Windows10 system computer prompt: "Your computer has a problem and needs to be restarted. We only collect some error messages and need to be restarted" The specific situation and corresponding solutions are as follows: Situation 1: The system conflicts with third-party antivirus software.
Default mode 1: Open the main program, insert mobile devices such as USB flash drive/SD card, and the disk symbols, models, capacity and other information of all removable disks in the current computer will be automatically listed in the disk list.
There is a virus in the computer (open Tencent Computer Butler, one anti-virus, one scan and kill). If you kill a Trojan horse or virus, you should restart immediately. After restarting the computer, go to "Isolation | Recovery" and completely delete the Trojan horse and virus! 2.
Keep clicking F8 when bootingKey, enter the system operation menu, select "Last Correct Configuration", restart the computer, and see if it can be solved.
Use CD-ROM to reinstall the system. The operation steps are as follows: (1) Prepare the system CD-ROM: If not, you can go to the computer store to buy it, and buy the latest version of the CD-ROM of any system you need to install. If you have a burning optical drive, you can also download the ISO format system file on the Internet and burn it to the system CD.
Your situation may be that there are bad clusters, viruses, disk controller errors, and memory problems in the virtual memory page file. Check whether the hard disk and memory are damaged. If there is no problem with the hardware, you can try to reinstall the system on the USB flash drive.
169.85MB
Check347.77MB
Check866.68MB
Check656.69MB
Check228.36MB
Check617.86MB
Check212.83MB
Check696.55MB
Check267.46MB
Check156.42MB
Check557.96MB
Check378.25MB
Check128.87MB
Check526.32MB
Check666.38MB
Check725.39MB
Check768.69MB
Check628.57MB
Check333.68MB
Check773.56MB
Check145.62MB
Check119.17MB
Check866.31MB
Check472.31MB
Check687.44MB
Check853.82MB
Check521.43MB
Check736.59MB
Check387.97MB
Check484.75MB
Check714.16MB
Check578.76MB
Check915.85MB
Check823.49MB
Check518.27MB
Check732.86MB
CheckScan to install
OKX Wallet extension to discover more
Netizen comments More
2369 心如死灰网
2025-01-10 14:02 recommend
1460 目睹耳闻网
2025-01-10 14:00 recommend
1770 匹马当先网
2025-01-10 13:44 recommend
1295 瞻情顾意网
2025-01-10 12:08 recommend
2479 日中必昃网
2025-01-10 11:58 recommend